19
inputs are correctly sealed and wa-
ter-tight.
When starting up the machine, make
sure that:
• The propeller turns in the correct
direction.
• There are no abnormal vibrations.
• If any of the electrical safety devices
blow, the apparatus must be quickly
disconnected from the mains sup-
ply. The whole installation should
be carefully checked before trying to
start up the machine again.
MAINTENANCE
• Before manipulating the ventilator,
make sure it is disconnected from
the mains supply even if it has previ-
ously been switched off. Prevent the
possibility of anyone else connecting
it while it is being manipulated.
• The apparatus must be regularly in-
spected. These inspections should
be carried out bearing in mind the
machine’s working conditions, in or-
der to avoid dirt or dust accumulat-
ing on the propeller, turbine, motor
or grids. This could be dangerous
and perceptibly shorten the working
life of the ventilator unit.
• While cleaning, great care should be
taken not to unstable the propeller
or turbine.
• All maintenance and repair work
should be carried out in strict com-
pliance with each country’s current
safety regulations.
PUTTING OUT OF SERVICE
AND RECYCLING
EEC legislation and our con-
sideration of future genera-
tions mean that we should al-
ways recycle materials where
possible; please do not forget
to deposit all packaging in the appro-
priate recycling bins. If your device is
also labeled with this symbol, please
take it to the nearest Waste Manage-
ment Plant at the end of its servicable
life.
If you have any queries about S&P
products, please contact our af-
ter-sales service in Spain, or your
local S&P dealer in any other country.
If in doubt, please visit our Web-Page
at www.solerpalau.com
To Next Page
Loading...
Need help?
General
