20. Reduce the throttle setting during engine shut down and, if the
engine is provided with a shut-off valve, turn the fuel off at the
conclusion of aerating or scarifying
21. When the engine is running the safety distance, given by the
handle, must always ne maintained.
1. Keep all nuts, bolts and screws tight to be sure the machine is in a
safe working condition.
2. Never store the machine with petrol in the tank inside a building
where fumes can reach an open flame or spark.
3. Allow the engine to cool before storing in any enclosure.
4. To reduce the fire hazard, keep the engine, silencer free of grass,
thatch, moss, leaves or excessive grease.
5. Check the catcher frequently for wear or deterioration.
6. Examine the machine regularly and replace worn or damaged parts
for safety.
7. If the fuel tank has to be drained, this should be done outdoors.
8. Regularly check or have your local dealer check the tightening of
blades and bolts that support the engine.
9. Blade replacement is a complex operation which involves specific
competence as well as special equipment. For safety reasons, this
operation must be carried out by your local dealer.
To Next Page
Loading...