Need help?Do you have a question about the Sangfor IAM 2.1 and is the answer not in the manual?
Details the process of logging into the IAM gateway device using the Web User Interface (WEB UI).
Configures the working mode of the IAM gateway device, with options like Route, Bridge, Bypass, and Single-arm.
Provides functionality to back up and restore gateway configurations.
Covers Policy Routing and Static Routing configuration for the IAM gateway device.
Configures the mode of the redundant system for high availability.
Defines rules to identify and control specific applications based on packet features.
Configures specific data packet access filtering rules between network interfaces.
Covers configurations for Source NAT (SNAT) and Destination NAT (DNAT).
Configures policies to control LAN users' access to the Internet.
Configures IAM gateway device and user authentication related options.
Configures bandwidth allocation for each line and creates bandwidth channels.
Helps to identify which module denied a packet and locate configuration mistakes.
Captures data packets to help locate configuration mistakes and troubleshoot policies.
Detects and removes viruses in data packets, protecting LAN computers.
Intrusion Prevention System to detect potential risks and allow or deny data packets.
Covers VPN connection-related configurations like Webagent, MTU, and compression.
Establishes standard IPSec VPN connections with third-party VPN devices.
Details DHCP service parameters including IP allocation, lease terms, and DNS/WINS settings.
To Next Page
General