sangiorgio F4 LED - Error Code Diagnostics and Solutions; F01-F04 Error Code Troubleshooting

35
EN
Problem Diagnosis Possible Solution
THE WASHING
MACHINE DOES
NOT START
• Check whether the plug is properly
inserted into the power socket.
• Check whether there is power at the
socket.
• Verify the selector knob is not
positioned on OFF.
THE WASHING
MACHINE DOES
NOT START THE
PROGRAMME
(lights n° 1-2-5-6
ashing)
• Reopen the door and close it with a
slight push.
THE WASHING
MACHINE DOES
NOT TAKE
WATER
(lights n° 1-3-5-6
ashing)
• Start the drain program and wait
about 2 minutes.
• Start the cotton program and check if
the water comes out of the detergent
drawer (g. 14) with normal ow. If
not, check the following:
1. Make sure that the tap is open and
that there is water supply.
2. Make sure the inlet hose is not
bent.
3. Make sure the water inlet hose
and/or the valve lters are not
blocked (g. 21).
THE WASHING
MACHINE DOES
NOT HEAT
(lights n° 2-3-5-6
ashing)
• Turn off the washing machine and
restart the wash programme.
THE WASHING
MACHINE DOES
NOT DRAIN
(lights n° 1-4-5-6
ashing)
• Remove the drain hose from the
drainage line and make sure it
directly drains into a container/sink,
then select the drain programme.
• Make sure the drain pump lter is not
obstructed.
• Make sure the drain hose is not
squashed or kinked.
°C
1
2
3
4
5
6
40
30
20
50
60
90
°C
1
2
3
4
5
6
40
30
20
50
60
90
°C
1
2
3
4
5
6
40
30
20
50
60
90
°C
1
2
3
4
5
6
40
30
20
50
60
90
F01
F02
F03
F04