To Next PageTo Next PageWhat to do if SANKO SWT-7000 III Measuring Instruments display 'BATTERY is dead! Replace all of them with NEW BATTERY. ?Power ???? ERROR?'?
If your SANKO Measuring Instruments show this message, the issue is likely due to low batteries or starting to press probe to object soon after switching on. Replace the batteries with new ones and hold the probe in the air, away from objects and metals, while the message is displayed.
What to do if SANKO SWT-7000 III show 'ERROR? Connect a probe before switched on. ?Power ????'?
This message appears when the ON/OFF key is pressed before connecting the probe. Ensure the probe is connected before pressing the ON/OFF key.
Why SANKO Measuring Instruments have no response upon pressing the ON/OFF key?
If your SANKO Measuring Instruments do not respond when you press the ON/OFF key, the batteries may be worn out. Replace them with two new batteries.
What to do if SANKO SWT-7000 III are unable to transfer data?
If you're having trouble transferring data from your SANKO Measuring Instruments, it could be due to a faulty USB cable connection or broken wiring, or the PC may not be ready. Make sure the cable is firmly connected. Also: 1. Install the attached CD correctly. 2. Set the Comport No. correctly.
What to do if SANKO SWT-7000 III Measuring Instruments batteries have worn out?
If the batteries in your SANKO Measuring Instruments have worn out, replace them with new ones.
General| Brand | SANKO |
|---|---|
| Model | SWT-7000 III |
| Category | Measuring Instruments |
| Language | English |
Covers critical safety warnings regarding water, contamination, handling, and tampering.
Details safety precautions for battery installation, storage, and AC adapter usage.
Advises on safe handling, storage conditions, and avoiding material contact.
Provides essential notes on manual reading, careful handling, and maintenance.
Lists all items included in the product package for user verification.
Identifies and describes key components of the coating thickness meter.
Step-by-step guide for inserting batteries and related safety precautions.
Instructions for attaching and detaching the measurement probe safely.
Guidance on proper probe grip and application for accurate measurements.
Instructions for switching the device's power source on and off.
Step-by-step guide for calibrating the meter to a zero reference point.
Procedure for calibrating using a standard thickness foil for accurate readings.
Method for zeroing the meter on multi-layered coatings for specific measurements.
Procedure for 2-foil calibration when standard zeroing is difficult.
Instructions for erasing stored calibration data from the device.
General guidance and steps for performing measurements with the device.
Enables continuous measurement by sliding the probe along the surface.
Adjusts measurement resolution for precise thickness inspection up to 500 μm.
Configures automatic power-off to save battery life after periods of inactivity.
Switches between AUTO, Fe, and NFe modes for FN-325 probe compatibility.
Enables or disables the display backlight for visibility in dark conditions.
Steps for transferring measured data to a PC using a USB cable.
Details factors like zero plate, thickness standards, and environmental conditions.
Addresses common symptoms like no response, battery errors, and connection problems.
Resolves issues related to probe malfunctions and data transfer interruptions.
Details model names, display, ranges, functions, power, and dimensions of the unit.
Lists specifications for the FN-325 probe, including ranges, accuracies, and accessories.
Details specifications for various other probe models like Fe-2.5, Fe-10, Fe-20.
Lists specifications for Fe-0.6Pen and NFe series probes, including ranges and accuracies.
Explains the Electro-Magnetic and Eddy Current principles used in measurements.
Provides contact details and branch information for the manufacturer.
