Santana PS-10 User Manual

7A-14 MANUAL TRANSMISSION
5) Remove spring (5) which keeps reverse gear contact in
position.
6) Use a punch (A) to tap the elastic bolt that fixes the reverse
gear selector head (9) from its shaft, until it is free.
NOTE:
If repairing selector heads or shafts, the bolts must be
extracted sufficiently to free the selector head, being
careful that it does not fall into the gear box.
A
9
7) Remove screw (6) that fixes reverse gear crosspiece (7).
NOTE:
The three bolts of the selector shafts can be extracted
at the end of the operation.
8) Extract rear gear selector shaft (8) and selector head (9).
7
8
6
9) Remove vane pin and spring pin which fix 5th gear selector
fork to its selector shaft.
5
8

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English