TOOLS AND PARTS NEEDED FOR ASSEMBLY
WARNING
1. For use outdoors or in amply ventilated areas.
2. An amply ventilated area must have a minimum of 25% of the surface area open.
3. The surface area is the sum of the walls surface.
4. This appliance is not fitted with “Atmosphere sensing device”.
Use only in a well ventilated area.
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
The heater is to be used only in a well ventilated area and is not to be used in a building, garage or any other
enclosed area.
TOOLS NEEDED:
Leak Detection Solution (Instructions how to make solution are included in Step8).
ATTENTION: This appliance is fitted with gas regulator, flexible gas rubber pipe and clamps according to
European Standards and the National Rules in force of the country of destination.
These components should be periodically substituted, according to the date reported on the body of each of
them, or according to the National Rules in force of the country of destination.
LPG cylinderis
not provided; ask your gas dealer about it according to this Instruction Manual.
Page 3
For questions, replacement parts, service help, or other assistance, please call
To Next Page
Loading...