To Next PageTo Next Page
Need help?Do you have a question about the Sanus VisionMount VMT14 and is the answer not in the manual?
Lists weight capacity and tilt specifications for the mount.
Warns about small parts posing a choking risk to users.
Notes the need for assistance when handling heavy components during installation.
Guide to finding the correct screw size for TV attachment.
Instructions for mounting brackets on TVs with flat backs.
Instructions for mounting brackets on TVs with irregular backs.
Instructions for mounting brackets using spacers.
Guidance on finding the correct wall plate position using Height Finder.
Instructions for drilling pilot holes for wood studs.
Locating wall studs and marking drill hole positions.
Drilling pilot holes into wood studs with specified bit size.
Inserting lag bolt anchors and then the lag bolts into the wall.
Properly tightening the lag bolts to secure the mount.
Seating anchors and drilling pilot holes into concrete or block walls.
Leveling the wall plate and marking hole locations.
Drilling pilot holes into concrete or block walls with specified bit.
Inserting wall anchors and then the lag bolts into the wall.
Tightening lag bolts until washers are firmly against the wall plate.
General| Product color | Black |
|---|---|
| Mounting type | Wall |
| Maximum weight capacity | 36.36 kg |
| Screen size compatibility | 26.00 - 47.00 \ |
| Tilt angle range | 0 - 10 ° |
Weight and Dimensions| Depth | 2.03 mm |
|---|---|
| Width | 59.94 mm |
| Height | 43.82 mm |
