Sanyo CP21SE1K - Service Mode Entry and Adjustment Table

-8-
Service Adjustments with Replacing Memory IC(IC802)
MENU
[Entering to Service Mode]
1. Press and hold the MENU button on the TV set and press the numeric 1 button on the Remote Control. Following
setting items appears on the screen.
Display for [V-SCO] V-S Correction adjustment
Item No.
Item
Data value
Display for [RF DELAY ADJ] RF AGC adjustment
Version
Item No.
Item
Data value
Data value for Red
Display for [DRV] White balance adjustment
Data value for Blue
To return to normal TV mode, press the MENU button on the TV set or the remote control handset.
2. Select item by pressing the SOUND MUTE (Item No. UP) or TIMER (Item No. DOWN) button on the remote control
handset.
3. Adjust data value by pressing the VOLUME + or VOLUME - button on the remote control handset.
Example
1
button POS 1
0102030405......200
200...96959493.....01
M
E
NU
TV/AV
CH
- +
TIMER
x
SERVICE MODE
INDEX ADDRESS DATA
2.11
126 RF DELAY ADJ 2A
12 V S CORRECT 50 2A
Version
DRIVER(R) 3F DRIVER(B) 45
Item
Item
Version
VOLUME +
VOLUME -
SERVICE MODE
INDEX ADDRESS DATA
2.11
SERVICE MODE
INDEX ADDRESS DATA
2.11
SM_21-BE6V (AC7-A)AUS 5/9/08 11:11 AM Page 8