16
4 Refrigeration, Plumbing & Electrical Procedures
4.1 Piping (Plumbing, Refrigeration)
● U-trap installation
Install U-trap referring to the drawing below.
● Sealing the refrigerant pipe opening
Seal pipe completely.
Insufficient sealing may cause the following problems:
Insufficient cooling
Excessive frost
Icing over
Condensation on the bottom of case.
Part Name Part Number
①
Drain Screen 8FL2162000500
②
O-Ring 8FL2646000100
③
Drain Trap 8FL2658000200
Seal this portion
com
letel
To Next Page
Loading...