- 31 -- 30 -
SCHEMATIC DIAGRAM (CD)
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol
!
!!
in the parts list and the schematic diagram designated components in which safety can be of
special significance. When replacing a component identified by
!
!!
, use only the replacement parts designated, or parts with the same ratings of resistance, wattage or voltage that are designated in the parts list
in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably insulated from the supply circuit before returning the product to the customer.
This is a basic schematic diagram.
To Next Page
Loading...
