- 35 -- 34 -
SCHEMATIC DIAGRAM (TUNER for XE)
This is a basic schematic diagram.
PRODUCT SAFETY
NOTICE
Each precaution in this
manual should be followed
during servicing.
Components identified with
the IEC symbol
!
!!
in the
parts list and the schematic
diagram designated
components in which safety
can be of special
significance. When
replacing a component
identified by
!
!!
, use only
the replacement parts
designated, or parts with the
same ratings of resistance,
wattage or voltage that are
designated in the parts list
in this manual. Leakage-
current or resistance
measurements must be
made to determine that
exposed parts are
acceptably insulated from
the supply circuit before
returning the product to the
customer.
To Next Page
Loading...
