Sanyo DC-BM500 - (AMPLIFIER for XE )

- 43 -- 42 -
SCHEMATIC DIAGRAM (AMPLIFIER for XE)
This is a basic schematic diagram.
PRODUCT SAFETY
NOTICE
Each precaution in this
manual should be followed
during servicing.
Components identified
with the IEC symbol
!
!!
in
the parts list and the
schematic diagram
designated components in
which safety can be of
special significance. When
replacing a component
identified by
!
!!
, use only
the replacement parts
designated, or parts with
the same ratings of
resistance, wattage or
voltage that are
designated in the parts list
in this manual. Leakage-
current or resistance
measurements must be
made to determine that
exposed parts are
acceptably insulated from
the supply circuit before
returning the product to
the customer.