Sanyo DC-F300 - SPECIFICATIONS; System Components Specifications

sPE’aFICATIONS
Tuner section
Reception frequency:
FM: 87.5-108 MHz
MW: 522-1611 kHz(UK)
LW: 144-288 kHz (UK)
AM: 522-1710 kHz (AU)
CD player section
Type:
Changer, 3-disc
Channels:
2-channel stereo
Sampling frequency:
44.1 kHz
Pick-up:
Optical 3-beam semiconductor laser
Laser output:
0.6 mW (Continuous wave max.)
Wave length:
790 nm
Frequency response:
20
HZ to 20 kHz
Wow/fluttec
Below measurable limits
Cassette deck section
Track system:
4-track, 2-channel stereo
Frequency response:
50 Hz to 15 kHz (Cr02 tape)
50 Hz to 14 kHz (Normal tape)
Signal-to-noise ratio:
60 dB (Dolby NR ON)
Wow/flutten
0.1270 (WRMS)
Fast forward/rewind time:
Approx. 110 sec. (C-60)
AmpWies S$f3CtiOn
output powefi
50 w x 2 (at 6 ohms, 107. distortion)
Sour-d preset:
FOW electronic presets
Inpwt%
VICtEO/PHONO IN: 400 mV(50k ohms)/4 mV(50k ohms) (UK)
VE=O IN: 400 mV/50k ohms (AU)
PPM3CESSOR IN: 300 mV/75k ohms
ouf@?Ls
:PFEOCESSOR OUT: 430 mV
.:SPEAKERS: 6 ohms
FWQNES: 8-32 ohms
pOWH requirements:
AC 2!30 V, 50
HZ (UK)
AC 230-240 V, 50
Hz (AU)
powew consumption:
l?aw
Dirnansiams:
27~W) x 330(H) x 320(D) mm
Weig$tlt:
8.7 kg
For AU: !Speaker systems
TygM?z
3 WY bass reflex
llmiti ~sedt
Wtmfec 13 cm cone type
Mid range: 5 cm cone type
Tv.@etec piezoelectric
Max&nurn power-handling capacity:
100 W (peak)
N~inal impedance:
8 dhms
Dkmnensioms:
18$3(W) x 330(H) x 262(D) mm
W&Qht:
3.3 kg (per speaker)
i
S~ifica@ons subject to change without notice.
18
-.
●