CD CHANGER OPERATION DESCRIPTION
1.
9
This set is capable of stocking and playing up to 3 CDs.
l While playing a CD, other discs can be replaced.
In this case, press the button for the disc No. you wish to remove, and then press the OPEN/CLOSE button.
l When the “POWER” button is turned off, the power turns off after the discs are loaded in the discs trays.
MOTOR
&
MECHANISM SWITCHES LAYOUT
r
Lcm3IUNLam
MOTOR
2. FUNCTION
(l)OPEN/CLOSE
1. The rotation of the OPEN/CLOSE MOTOR rotates the
OPEN/CLOSE IDLER GEAR via the BELT and PULLEY,
and the RACK GEAR which is intermeshed with the OPEN/
CLOSE IDLER GEAR moves forward during “OPEN”,
backwards during “CLOSE”.
l The HOME POSITION is reached when the largest square
hole in the UP/DOWN CAM GEAR is between the
SENSORS.
2. Rotate the UP/DOWN CAM GEAR counter-clockwise (with
OPEN/CLOSE during PLAY) or clockwise (with normal
OPEN/CLOSE), raise the GEAR-BLOCK BRACKET, stop
at the selected TRAY, hold the TRAY GUIDE by means of
the OPEN/CLOSE RACK and save the other TRAY
GUIDES.
3. The OPEN/CLOSE motor start running, the OPEN/CLOSE
RACK moves forward, the TRAY LOCK LEVER is raised to
lock the TRAY, and the OPEN operation commences.
Y
SLIDE
CAM GEAR 2
DRIVE GEAR 2
To Next Page
Loading...
