SPECIFICATIONS
Wrier section
Reception frequency
FM: 87.5-108 MHz
AM: 522-1710 kHz (9 kHz step)
520-1710 kHz (1O kHz step)
CD plsyer section
Type:
Changer, 3-disc
Channels:
2-channel stereo
Sampling frequency:
44.1 kHz
Pick-up:
Optical 3-beam semiconductor laser
Laser output:
0.6 mW (Continuous wave max.)
Wave length:
790 nm
Frequency response:
20 HZ to 20 kHz
Wow/flutte~
Below measurable limits
Cassette deck section
Track system:
4-track, 2-channel stereo
Frequency response:
50 Hz to 15 kHz (CrOz tape)
50 Hz to 14 kHz (Normal tape)
Signal-to-noise ratio:
60 dB (Dolby NR ON)
Wow/f lutte~
0.1 2% (WRMS)
Fast forward/rewind time:
Approx. 110 sec. (C-60)
Amplifier section
Output power
Main amplifiec 40 W x 2 (at 6 ohms, 10% distortion)
Centre amplifie~ 40 W (at 8 ohms, 10% distortion)
Surround amplifier: 20 W x 2 (at 16 ohms, 107. distortion)
Inputs
VIDEO/DVD IN: 400 mV/50k ohms
outputs
FRONT SPEAKERS: 6 ohms
CENTER SPEAKER: 8 ohms
SURROUND SPEAKERS: 16 ohms
PHONES: 8-32 ohms
SUB WOOFER: lok ohms
Speaker systems
Front speaker system (SX-F430)
Type:
3 way bass reflex
Unit used:
Woofec 13 cm cone type
Mid range: 5 cm cone type
Tweetec piezoelectric
Maximum power-handling capacity:
80 W (peak)
Nominal impedance:
6 ohms
Dimensions:
21 O(W) x 330(H) x 240(D) mm
Weight:
3.6 kg (per speaker)
Centre speaker system (SX-CE430)
Type:
Bass reflex
Unit used:
Full range, 10 cm cone type
Maximum power-handling capacity:
80 W (peak)
Nominal impedance:
8 ohms
Dimensions:
270(W) x 130(H) x 184(D) mm
Weight:
1.4 kg
Surround speaker system (SX-SR430)
Type:
Bass reflex
Unit used:
Full range, 10 cm cone type
Maximum power-handling capacity:
40 W (peak)
Nominal impedance:
16 ohms
Dimensions:
21O(W) x 130(H) x 162(D) mm
Weight
0.9 kg (per speaker)
Specifications subject to change without notice
Power requirements:
AC 230-240 V, 50
HZ
Power consumption:
130W
Dimensions:
270(W) x 330(H) x 333(D) mm
Weight:
9.8 kg
,::!,:.,
,--
..
4,.,
(AU) 1AD6P1 P0616-E
SANYO Electric Co., Ltd.
Printed in Hong Kong
To Previous Page
Loading...
