Sanyo DC-MCR30 - Schematic Diagram(Main)

- 13 -- 12 -
SCHEMATIC DIAGRAM(MAIN)
This is a basic schematic diagram.
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during
servicing. Components identified with the IEC symbol
!
!!
in the parts list and the schematic diagram designated
components in which safety can be of special significance.
When replacing a component identified by
!
!!
, use only
the replacement parts designated, or parts with the same
ratings of resistance, wattage or voltage that are designated
in the parts list in this manual. Leakage-current or resistance
measurements must be made to determine that exposed
parts are acceptably insulated from the supply circuit before
returning the product to the customer.