Sanyo DP42841 - Page 45

– 45 –
Is there
terminal ?
No
No
No
RF(TV), Digital(TV)
only
Check:
Check:
Check:
Check:
Speaker (SP901, SP902)
All Modes ?
Is there
signal at IC001 ?
Line: IC001 30,24pin(L), 21,15pin(R)
Parts: Around IC001 (Audio AMP.)
Parts: Around IC001 (Audio AMP.),IC5500
Ye s
Ye s
Ye s
A6100 21pin - IC5500 M1pin (IF-OUT1)
A6100 20pin - IC5500 M2pin (IF-OUT2)
Parts: Around A6100(TU), IC5500
AV1 Terminal - IC5500 T4pin (L), W1pin (R)
AV2 Terminal - IC5500 U3pin (L), V2pin (R)
AV3 Terminal - IC5500 U1pin (L), V4pin (R)
PC Terminal - IC5500 U4pin (L), V1pin (R)
Monitor Out only
Line:
Line:
Check:
Line:
IC001 37pin - IC5500 C3pin (ACLK)
IC001 3pin - IC5500 D3pin (ADATA1)
IC001 4pin - IC5500 B1pin (LRCLK)
IC001 5pin - IC5500 D4pin (BCLK)
Check:
Line:
Check:
Line:
IC6200 7pin (L) - Monitor Out Terminal
IC6200 1pin (R) - Monitor Out Terminal
Parts: Q6200, Q6202
AV1 or AV2or AV3
or PC
HDMI 1 / 2 / 3
HDMI1 Terminal - IC6560 - IC5500
HDMI2 Terminal - IC6560 - IC5500
HDMI3 Terminal - IC6560 - IC5500
Parts: Around IC6560, IC5500
signal at speaker
TROUBLESHOOTING FLOW CHARTS (CONT.)
NO AUDIO