Sanyo DP50749 - Setup Menu: V-Chip; V-Chip Parental Controls; Advanced V-Chip System

– 9 –
MECHANICAL DISASSEMBLY (CONT.)
PANEL MODULE REMOVAL
1. Disconnect the following socket connections.
PDP Module (Power Unit) ~ Main Board: P813
PDP Module (Power Unit) ~ AC inlet: SC101
2. Remove 6 screws (J:4x14) from the panel holders
(Mounting Frames) to take the panel module off.
3. Remove 8 screw (I4x8) to take off each mounting
panel (4 pcs).
3. Remove 18 screws (F3x6) to take the mounting
filter (6 pcs) and filter glass off.
F
F
F F F F
F
F
F
F
F
F
F
F
F
F
F
F
Mounting Filter
Filter Grass
J
J
J
J
J
J
Mounting Frame
Mounting Panel
(under the
Mounting Frame,
4pcs)