10
Need help? www.sanyoctv.com 1-800-877-5032
GETTING STARTED— INITIAL CHANNEL SEARCH (FIRST POWER ON)
Turn On TV
Wait for on-screen instructions to per-
form an Initial Channel Search.
CHANNEL SEARCH
Checks Antenna and Cable signals con-
nected to the Antenna terminal.
AV SEARCH
Searches for signals from devices con-
nected to the AV input jacks.
Note: Power ON external devices connected to the TV before
comencing an AV Search.
An AV search will begin if no Antenna signals are
detected, if neither of these searches detect signals,
the HDTV will tune to input Video1.
Plug in AC power cord
120V AC, 60Hz
INITIAL SETUP SCREEN
CHANNEL SEARCH METHOD SCREEN
CHANNEL SEARCH PROGRESS SCREEN
Note: “Auto” detects the mode detection, Cable or Air, first,
and then proceeds with the channel search.
ON SCREEN HELP MENU
Access an on screen trouble shooting
guide (in the Initial Setup Screen.)
You may acces the On Screen Help
menu later on at any time via the main
menu or by pressing the HELP key on
your remote control.
To Next Page
Loading...
