Sanyo dvw6100 - Base Assembly Sled; Gear Assembly Feed; Gear Assembly Middle; Gear Assembly Rack

5-3
DECK MECHANISM DISASSEMBLY
3.Base Assembly Sled (Fig. 5-3)
1) Release 4 Screw(S2).
2) Disconnect the FFC Connector(C1)
3-1. Gear Assembly Feed
1) Unhook the Locking Tab(L2) in direction of arrow.
3-2. Gear Middle
3-3. Gear Assembly Rack
1) Release the Scerw(S3)
4. Rubber Damper (Fig. 5-3)
(L2)
(S2)
(S2)
(C1)
(S2)
(S2)
(BLACK)
(GREEN)
(S3)
(BLACK)
(GREEN)
MIDDLE GEAR
GEAR RACK ASSEMBLY
GENERAL
PICK UP
ASSEMBLY
FEED GEAR ASSEMBLY
MIDDLE GEAR
GEAR RACK ASSEMBLY
SPINDLE MOTOR ASSEMBLY
RUBBER DAMPER
RUBBER DAMPER
GENERAL PICK UP ASSEMBLY
BASE PU(OUTSER
RUBBER DAMPER
T)
FEED GEAR ASSEMBLY
SPINDLE MOTOR ASSEMBLY
RUBBER DAMPER
Fig. 5-3