-20-
4. Installation to TOYOTA/NISSAN Vehicles
Install the unit using the existing TOYOTA/NISSAN Mounting Bracket and Screws. Use mounting holes in
the unit chassis. "T" or "N" is engraved next to each mounting hole. Use "T" holes for Toyota vehicles and
"N" holes for Nissan vehicles.
TOYOTA/NISSAN
Mounting Bracket
Screw
Screw
CAUTION
ONLY USE M5 x 8 SCREW
(NOT INCLUDED WITH THIS
UNIT) AS ILLUSTRATED ABOVE.
USE OF ANY OTHER SCREW OR
HARDWARE MAY RESULT DAMAGE
TO HEAD UNIT.
ECD-T1820_E.fm Page 20 Tuesday, December 14, 2004 8:33 AM
To Next Page
Loading...