Sanyo ECO R410A - Table of Contents

4
CONTENTS
Page Page
IMPORTANT! ............................................................ 2
Please Read Before Starting
Check of Density Limit
1. GENERAL .............................................................. 5
1-1. Tools Required for Installation (not supplied)
1-2. Accessories Supplied
1-3. Type of Copper Tube and Insulation Material
1-4. Additional Materials Required for Installation
2. SELECTING THE INSTALLATION SITE ............... 8
2-1. Indoor Unit
3. HOW TO INSTALL THE INDOOR UNIT ................. 9
Concealed Duct Type (U Type)
3-1. Required Minimum Space for Installation and
Service
3-2. Suspending the Indoor Unit
3-3. Installing the Drain Piping
3-4. Checking the Drainage
3-5. Increasing the Fan Speed
3-6. When Installing the Indoor Unit
3-7. Required Minimum Space for Installation and
Service
Slim Concealed-Duct Type (UM Type)
3-8. Required Minimum Space for Installation and
Service
3-9. Preparations Before Installation
3-10. For Bottom Intake
3-11. Installing the Duct
3-12. Suspending the Indoor Unit
3-13. Installing the Drain Piping
3-14. Checking the Drainage
3-15. Increasing the Fan Speed
Wall-Mounted Type (K Type)
3-16. Removing the Rear Panel from the Unit
3-17. Selecting and Making a Hole
3-18. Installing the Rear Panel onto the Wall
3-19. Removing the Grille to Install the Indoor Unit
3-20. Preparing the Tubing
3-21. Shaping the Tubing
3-22. Installing the Drain Hose
3-23. When Using Wireless Remote Controller
Instead of Wired Remote Controller
3-24. External Electronic Expansion Valve Kit
(ATK-SVRK56BA)
■
■
■
Floor-Standing Type (F Type)
Concealed Floor-Standing Type (FM Type)
3-25. Required Minimum Space for Installation and
Service
3-26. Dimensions and Part Names
3-27. Removing and Attaching the Front Panel
3-28. Installing the Refrigerant Tubing
3-29. Installing the Drain Piping
3-30. Installing the Remote Controller
SUPPLEMENT ON DRAIN PIPING
4. ELECTRICAL WIRING ........................................ 33
4-1. General Precautions on Wiring
4-2. Recommended Wire Length and Wire
Diameter for Power Supply System
4-3. Wiring System Diagram
4-4. Important Note When Wiring for Common
Type
5. HOW TO PROCESS TUBING .............................. 39
5-1. Connecting the Refrigerant Tubing
5-2. Connecting Tubing Between Indoor and
Outdoor Units
5-3. Insulating the Refrigerant Tubing
5-4. Taping the Tubes
5-5. Finishing the Installation
6. APPENDIX ........................................................... 43
NAME OF PARTS
Care and Cleaning
Troubleshooting
Tips for Energy Saving
■
■
■
■
■
■
85464369238000INSTALLinst.indb4485464369238000INSTALLinst.indb44 2009/11/1911:28:062009/11/1911:28:06