2.
Replacement
of
the paper
Just before the paper runs out, a coloured part will
appear
to
remind you
that
a new paper roll must
be
inserted.
3. Replacement
of
Ink Ribbon
Remove the ribbon spool from the axis by turning
the spool lever. Insert a new ribbon into the axis
by
turning the spool lever in the same way
as
it
was
removed. Then set the ribbon
as indicated in the
Fig.
9.
Use
heavy dencity ink ribbon.
Axis
bik Ribbon
Spool Lever
Fig. 9
-8-
4. Suggestions for Operation
(1)
Do
not impede the rotation
of
the drum by
pulling the paper
or
inserting foreign object.
(2) Do not lubricate the machine.
(3) In case
of
trouble, consult your dealer.
(4) Do
not
remove the journal protection cover
during operation.
5.
When the paper jam occurs
Do
not
pull the paper
by
force, or keep depressing
the
[!]key.
Pull the paper forward or backward.
If
one or
more pieces
of
paper remain inside, remove them with
tweezers.
When this
is
impossible by the above method, take
off
platen cover and remove paper with tweezers.
Take
off
platen cover from concave part
of
Frame
with tweezers.
Platen
cover
Tweezersn-
____
_......
==1··F<>m<
Fig.
lO
(
(
To Next Page
Loading...