Sanyo ECR-238 - Page 45

ret
Points
of
Assembly
Work
Crank shaft holder
ee
Paper feeding first
transmission gear
(Print shaft)
Crank shaft holder
Orientation of W-1
fe)
B,
Crank shaft
W-1 holder
Main Assembl Gear Trains
=| Points of Assembly Work
Reduction gear shaft @ Pass the shaft through the holes in both sides of the frame unit.
. Second reduction gear | @ Align each gear so that its shape fits the corresponding end of the
reduction gear shaft, then press each gear until it clicks into place.
3 Third reduction gear
Third
reduction
gear
Reduction
gear shaft
Frame T
Second reduction gear