Sanyo EM-C1800K - For Memory Storage

USING THE PROGRAMME KEY FOR MEMORY STORAGE
OPERATING INSTRUCTION (2)
23
*You can set the power level at “0” to use the device as a timer (up to 60 minutes). In such case, the oven lamp
will not light. Only the indication of remaining time will decrease every second after the start button is pressed.
Note:
1. A “beep” tone sounds whenever any key is touched.
2. If the desired numeral is not displayed, touch CLEAR key and restart (procedures) from the beginning.
3. If an operating time over the Max. Input time is selected, subsequent key operation is impossible.
4. To enter 1 minute (60 seconds) input ”100”.
5. The storing process is completed by touching MEMORY key.
If MEMORY key is not touched, the new settings will not be stored and the previous memory information will be retained.
Max. Input time
max power (no input)
9
8
7
6
5
4
3
2
1
0
POWER LEVEL LIST (Input figure)
POWER (W)
EM-C1800K
1800
1620
1440
1260
1080
900
720
540
360
180
0
6 min. 00 sec.
30 min. 00 sec.
”
”
”
”
”
”
”
”
”
POWER LEVEL LIST