power cord when disconnecting it from an A
outlet. Grasp it by the plug
Do not put your fi ngers or objects into the unit
Do not install the unit in direct sunlight, near strong magnetic fi elds, or in a place subject to dust or strong
v
Install the unit in a horizontal and stable position. Do not place anythin
directly on top or bottom o
on your external devices, noise or disturbance in the picture and/or sound may be
on the environment, the temperature of this unit may increase sli
htly. This is not a malfunction
Be sure to remove the disc and unplug the A
power cord from the outlet before moving the unit
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for
a few hours until its inside gets dry
- The unit is moved from a cold
materials are recyclable and can be reused. Please dispose o
Batteries should never be thrown awa
information, please visit -
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co., Ltd. and Funai
Corporation, Inc. under license from SANYO Electric Co., Ltd.
Any liability related to SANYO products, including design and quality, is the sole responsibility of Funai Electric
Co., Ltd. and Funai Corporation, Inc.
Please contact Funai Corporation, Inc. for any questions or claims related to SANYO products:
sanyo-av.com
© 2015 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
hereinwithout the obligation to notify any person or organization of such changes.