Sanyo FWBP506FF - CONNECTIONS; Connecting to a TV

EN 12
4. CONNECTIONS
4.1. Connection to a TV
■ HDMI Connection (Supports up to 1080i
(
*
1)
, 1080p
(
*
2)
, 1080p/24
(
*
3)
resolution.)
HDMI OUT
HDMI IN
HDMI OUT
Your TV
HDMI cable
(not supplied)
No analog audio connection required.
(*1) 1080i: Outputs video data with a frame rate of 30 frames per second.
(*2) 1080p: Outputs video data with a frame rate of 60 frames per second.
(*3) 1080p/24: Outputs video data with a frame rate of 24 frames per second.
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• Use an HDMI cable with the HDMI logo (a certifi ed HDMI cable) for this connection. High Speed HDMI cable
(also known as HDMI category 2 cable) is recommended for better compatibility.
NoteD
• If the TV receives no Audio / Video signal after properly connecting the unit and the TV with an HDMI cable, it
may be the TV. Please refer to the TV’s user’s manual.
• If the TV receives no Audio signal after properly connecting the unit and the TV with an HDMI cable, make
sure the TV input is not an HDMI-DVI Input terminal.