Sanyo FWBP706F - HDMI Audio Output

EN 14
4.3. HDMI Audio Output
“Audio Output” > “HDMI” setting
A
Bitstream PCM Re-encode
Media Source
BD Dolby Digital Dolby Digital Multi LPCM Dolby Digital
Dolby Digital Plus Dolby Digital Plus Multi LPCM Dolby Digital Plus
(*1)
Dolby TureHD Dolby TrueHD Multi LPCM Dolby TrueHD
(*1)
DTS DTS 2ch PCM DTS
DTS-HD
High Resolution
DTS-HD
High Resolution
2ch PCM
(*2)
DTS-HD
High Resolution
(*3)
DTS-HD
Master Audio
DTS-HD
Master Audio
2ch PCM
(*2)
DTS-HD
Master Audio
(*3)
LPCM Multi LPCM Multi LPCM Multi LPCM
(*1)
DVD Dolby Digital Dolby Digital Multi LPCM Dolby Digital
DTS DTS 2ch PCM DTS
MPEG Multi LPCM Multi LPCM Multi LPCM
PCM Multi LPCM Multi LPCM Multi LPCM
Audio CD LPCM 2ch PCM 2ch PCM 2ch PCM
DTS-CD DTS DTS 2ch PCM DTS
AVCHD Dolby Digital Dolby Digital Multi LPCM Dolby Digital
LPCM Multi PCM Multi PCM Multi PCM
Audio File MP3/FLAC 2ch PCM 2ch PCM 2ch PCM
AAC AAC
(*4)
2ch PCM AAC
(*4)
Netfl ix Dolby Digital Plus Dolby Digital Plus Multi LPCM Dolby Digital Plus
HE-AAC AAC2ch PCMAAC
VUDU Dolby Digital Dolby Digital Multi PCM Dolby Digital
Dolby Digital Plus Dolby Digital Plus Multi LPCM Dolby Digital Plus
HE-AAC AAC2ch PCMAAC
MP3 2ch PCM 2ch PCM 2ch PCM
YouTube™ HE-AAC AAC2ch PCMAAC
*1) If there is Secondary Audio or Interactive Audio, it will be output in Dolby Digital.
*2) Only the Core Substream is decoded.
*3) If there is Secondary Audio or Interactive Audio, it will be output in DTS.
*4) AAC Raw only supports the source with sample rate between 32kHz and 48kHz.
NoteD
• If the connected device is not compatible with HDMI BITSTREAM, audio will be output as multi LPCM
or 2-channel down-mixed LPCM depending on the capability of the connected device even if you select
“Bitstream” in “HDMI” setting.
• If “HDMI” is set to “Bitstream” and this unit is connected to a Bitstream compatible device, only Primary
Audio of the BD-Video will be output. (Secondary Audio and Button Sounds will not be output.)