EN 17
5. BEFORE YOU START
5.1. Finding a Viewing HDMI Input on Your TV
After you have completed all of the connections to your TV, review the steps below.
1. Press [
(POWER/Standby)] to Turn On the unit.
2. Turn On your TV.
3. Switch your TV's input to the HDMI port which your unit is connected to.
This is the correct HDMI Input view.
• It may take a few moments for the Menu screen to appear.
• When this unit is turned On for the first time, the “Initial Setup” screen will appear.
5.2. Initial Setup
Please follow the instructions below to complete the initial Setup.
1. While Welcome screen is displayed, press [OK].
2. Language Setup screen will appear. Use [ ] to select your Language, then press [OK].
Next
Previous
Español
Choose OSD language for all OSD windows,
menu, etc...
English
Français
Language Setting
Page: 2/4 Easy Setup
3. HDMI CEC Setup screen will appear. Use [ ] to select “On” or “Off”, then press [OK].
4. Network Setup screen will appear. Use [
] to select “Set up now” or “Not now”, then press [OK].
• If you select “Set up now”, refer to “Network Connection” on page 41 for further operation.
• If you select “Not now”, the Home Menu screen will appear.
continued on next page
To Next Page
Loading...
