Sanyo FWBP706F - List of Settings

EN 38
In “Setup”, you can customize various kinds of settings as you prefer.
Refer to the following instructions to navigate through the Setup Menu.
1. Press [HOME] to access the Home Menu.
2. Use [
] to select “Setup”, then press [OK].
3. Use [
] to select the desired Setting, then press [OK].
4. Use [
] to select the desired Category, then press [OK].
5. Use [
] to move up and down the list to select Menus / Options.
6. To make a selection or to access options for an item, select the desired item, then press [OK].
• To go back to the previous screen, press [RETURN] or [
].
7. Press [HOME] to Exit.
Refer to the following table for the types of settings you can customize.
The items highlighted in gray are the Default Settings.
Settings Category Menus / Options
Mode Settings Network Interface Ethernet (Wired)
Wireless
Wireless Setting
Network Status
Connection Test
IP Setting Auto
Manual
BD-Live Connection Allow
Limited Allowance
Prohibit
Proxy Setting Disable
Enable
Proxy Host
Proxy Port
Language OSD English
Français
Español
Menu
Chinese German Russian
Danish Italian Spanish
Dutch Japanese Swedish
English Korean More
Finnish Norwegian
French Portuguese
Audio
Chinese German Russian
Danish Italian Spanish
Dutch Japanese Swedish
English Korean More
Finnish Norwegian
French Portuguese
10. LIST OF SETTINGS
continued on next page