Sanyo FWBP706F - Scan

EN 45
Scan
1. Follow steps 1 to 5 in “Auto” on page 44.
2. Use [
] to select “Scan”, and use [ ] to select “Next”, then press [OK].
• This unit will automatically start searching for nearby wireless networks.
3. The search result will be displayed. Use [
] to select an appropriate SSID, then press [OK].
• If you select an SSID with “NONE” in the Security column, move on to step 7.
Setup
SSID Security Signal Strength
Network
Language
Streaming Co...
Security
System
WPA2-PSK
WPA-PSK
WPA2-PSK
WPA2-PSK
WPA-PSK
WPA2-PSK
100%
100%
100%
100%
100%
100%
access_point_
access_poi...
access_poi...
access_poi...
access_poi...
access_poi...
4. “WEP / WPA / WPA2 Key” entry screen will appear. Use [ ] to select the input fi eld, then press [OK].
The Software Keyboard will appear.
Setup
WPA-PSK
Exit
Network
Language
Streaming Co...
Security
System
Previous
Next
5. Enter the WEP / WPA / WPA2 Password of the selected wireless network using Cursor buttons and [OK].
After entering the Password, select “Enter”, then press [OK].
• If you do not know the WEP / WPA / WPA2 Key for your wireless network, please confirm the sticker on
the Router.
• The WEP / WPA / WPA2 Key entries are case-sensitive.
Setup
Clear
abcde
123
f
g
hi
j
456
klmno
789
pq
rs
t
.@0
uvwxyz
Back Space Enter
ABC
continued on next page