EN 54
C Network Update
You can Update the Software of this unit via the Internet if it is connected to the Internet.
1. Follow steps 2 to 5 in “Disc / USB Memory Stick Update” on page 53.
2. Use [ ] to select “Network”, then press [OK].
• The unit will connect to the Server, then check for the latest Software Version.
3. Software Version confi rmation screen will appear. Press [OK].
• Downloading of the latest Software will start. (Download may take some time.)
After completing the download, Update will start.
4. After Updating fi nishes, this unit will restart automatically.
CautionC
• Please Do Not Unplug the AC Power cord, Ethernet cable, Wireless Modem / Router or press [
(POWER/
Standby)] to turn the unit to Standby mode while using “Network Update”.
NoteD
• In order to Update the Software via the Internet, you must connect the unit to the Internet and Set up
necessary Settings.
• For the network connection, refer to “Connection to the Network” on page 15.
• For the Network Setup, refer to “Network Connection” on page 41.
• Software Update will not change any of the current Settings.
To Next Page
Loading...
