Sanyo FWBP706F - Restore Default Settings

EN 55
11.6. Restore Default Settings
HOME A “Setup” A “ ” A “System” A “Load Default”
This unit will be Reset to Factory Default Settings. All the settings will be Initialized.
1. Use [
] to select “Setup” in the Home Menu, then press [OK].
2. Use [
] to select “ ”, then press [OK].
3. Use [
] to select “System”, then press [OK].
4. Use [
] to select “Load Default”, then press [OK].
5. Confi rmation message will appear. Use [
] to select “OK”.
• Initialization will start.
NoteD
• The Initial Setup screen will appear upon completion of Initialization.