EN 8
3. FUNCTIONAL OVERVIEW
3.1. Front Panel
1 3* 4*2 5* 6 7
* The unit can also be turned On by pressing this button.
1. Disc tray
2. Infrared sensor window
3.
(OPEN/CLOSE) button*
4.
(PLAY/PAUSE) button*
• Press to start playback.
• During playback, press to pause playback.
5.
(POWER/Standby) button*
6. Power-On indicator
7. USB Input
CautionC
• Do not connect any device other than USB Memory Stick or USB Card Reader into the USB Input. (e.g. PC,
external HDD, digital camera, keyboard, mouse, USB-Hub, etc.)
• When connecting a USB Memory Stick, connect it directly to the USB Input. Do not use a USB extension
cable.
NoteD
• Due to new ENERGY STAR
®
requirements, this unit will automatically turn on the screen saver after 5
minutes of inactivity and enter standby mode after 25 minutes of inactivity.
3.2. Rear Panel
12 3
1. AC Power cord
2. LAN terminal
3. HDMI OUT jack
CautionC
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have a TV RF modulator.
To Next Page
Loading...
