Sanyo FWDP105F - Playback

–
10
–
EN
DVD FUNCTIONS
Playback
(
 on page 11
)
1
Press [ y ] to turn on this unit.
2
Press [ A ] and insert a disc with
label facing up.
3
Press [ B ] or [ 5BF ] to start playback.
4
Press [ C ] to stop playback.
Note(s):
•Slow Forward speed is different depending on the disc.
Approximate speed is ×1/2, ×1/4 and ×1/8.
Slow Forward Search
Press [ g ] Repeatedly in the Pause mode
to select the required Forward speed.
To continue Playback, press [
B ] or [ BF ] .
SF 1/2
Fast Forward / Reverse Search
Use [ g ] or [ h ] Repeatedly during
Playback to select the required Forward or
Reverse Speed.
To continue Playback, press [
B ] or [ 5BF ].
FORWARD X2
Pause and Step-by-Step Playback
Press [ F ] or [ 5BF ] during playback.
To continue Playback, press [ B ] or [ 5BF ].
The disc goes forward by one Frame each time [ F ] (on the
remote control) is pressed in the Pause mode.
To continue Playback, press [
B ] or [ 5BF ].
PAUSE
Note(s):
•Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume Playback
Press [ C ] during Playback. PRE STOP icon
will appear at the top-left on the TV screen.
Press [
B ] or [ 5BF ], RESUME icon will
appear at the top-left on the TV screen and
Playback will Resume from the Point where
Playback was Stopped.
PRE STOP
Note(s):
•To Cancel Resume, press [ C ] one more time in the Stop
mode.
•The Resume Playback information stays in unit Memory even
when the Power is turned Off, as long as the Disc stays in the
unit.
Note(s):
•Fast Forward or Reverse Search speed is different depending
on the disc. Approximate speed is ×2, ×4, ×8 and ×20.
Note(s):
•Zooming function does not work while the Disc Menu is
displayed.
•Some Part of the Picture may not be Zoomed depending on
the Disc or Playback status.
Disc Menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / 0 / 1] to select an item, then press
[ENTER], [ B ] or [ 5BF ] (on the unit).
2
Zoom
1) Press [ZOOM] Repeatedly during Playback
to select the required Zoom factor:
×1.5, ×2 or ×2.5.
2) Use [
K / L / 0 / 1] to Slide the Zoomed
Picture across the TV Screen.
3) To Exit the Zoom function, press [ZOOM] Repeatedly to
select “ZOOM 1”(Off).
ZOOM 2
Calling Up a Menu Screen during Playback
•Press [MENU] to call up the Disc menu.
•Press [TOP MENU] to call up the Title menu.
4
3
1
2
Before:
Turn On the TV, Amplifier and any other Device(s) which are
connected to this unit. Make sure the TV and Audio Receiver
(not supplied) are set to the correct Channel/Input.
Note(s):
•When you Play back a DVD or CD-R/-RW with JPEG Files,
refer to details on page 11.
•“INVALID ENTRY” may appear at the Top-left on the TV
Screen when the operation is prohibited by the disc or this unit.
•SomeDVDmayStartPlaybackfromtitle2or3duetospecic
programs.
•During the Playback of a 2-layered disc, pictures may Stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is Not a Malfunction.
•You can change the On-screen language in “Menu” setting.
(Refer to page 17.)
Please note :
•Most instructions in this manual refer to Remote Control use.
•This unit will automatically turn On the Screen Saver after 5 minutes of inactivity and into the Standby mode after 25 minutes of
inactivity.
Lights up when power is On.
2 3 1
*
* [ 5BF ] can be used both as [ B ] and [ F ].