Sanyo FWDP105F - Connection to an Audio System

–
8
–
EN
Audio
This unit
Analog Audio Connection
AUDIO OUT
Audio cable (supplied)
Connection to an Audio System
Supplied cables used in this connection are as follows:
•Audio cable (L/R) × 1
Please purchase the rest of the necessary cables
at your local store.
COAXIAL DIGITAL OUT
Digital Audio Connection
Coaxial cable (not supplied)
Note(s):
•TheaudiosourceonadiscinaDolbyDigitalmulti-chan-
nel surround format cannot be recorded as digital sound
by an MD deck.
•ByhookingthisunituptoaDolbyDigitaldecoder,you
can enjoy high-quality Dolby Digital multi-channel sur-
round sound as heard in the movie theaters.
•PlayingbackaDVDusingincorrectsettingsmaygener-
ate noise distortion and may also damage the speakers.
* To complete these settings, refer to pages 15-18.
SETUP > AUDIO >
Audio out
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
BITSTREAM
Connecting to the other device
(an MD deck etc.)
without Dolby Digital decoder.
PCM
Connection
Setting
Stereo system with Analog Audio Input
jacks
Analog Audio
Input jacks
AV Receiver / Amplifier with a Coaxial Digital In Audio
jack
Coaxial Digital In Audio
jack