Sanyo FWZV475F - Switching Camera Angles; Reducing Block Noise

57
EN
57
EN
Recording
Playback
Editing
Introduction
Connections Basic Setup Function Setup VCR Functions
Others Español
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Camera Angles Reducing Block Noise
Some DVD-video have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
1) During playback, press [DISPLAY] to bring up the
display menu.
2) Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
Angle icon appears when a switching camera angle is
available.
Angle will switch each time you press [OK].
Note
•
Angle icon does not appear on the TV screen if the
“Angle Icon” is set to “OFF” in the “Playback” menu.
Refer to page 76.
This function reduces noise in the playback picture.
1) During playback, press [DISPLAY] to bring up the
display menu.
2) Use [{ / B] to select
to display the selection
menu.
e.g.) DVD-video
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [K / L] to select a desired option, then press
[OK].
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
OFF
Type 1
Type 2
Your setting will be activated.
OFF : When playing back titles with a few noises
such as DVD-video.
Type 1 : For the titles recorded in long time mode
such as EP or SLP mode.
Type 2 : Same as type 1, only more effective.