SETUPS
1
Parental Lock (Default: OFF)
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from viewing
inappropriate material.
Use [K / L] to select the desired level, then press [OK].
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
If a password has not been set yet, proceed to
A
.
If a password has been set already, proceed to
B
.
Note
•
Parental lock function may not be available to some
discs.
•
WithsomeDVD,itmaybedifculttondiftheyare
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you have
set.
•
Record the password in case you forget it.
•
If there is a DVD in the unit when you set up the parental
lock, press [A] to activate the parental lock level.
A
A password has not been set yet.
Use [
K
/
L
] to select “Yes”. Use [the Number buttons] to
enter a new password except for 4737, then press [OK].
Change Password?
Yes
No
Password Input
Yes
Your setting will be activated.
B
A password has been set already.
•
Use [the Number buttons] to enter the current
password.
Password Input
Your setting will be activated.
•
If you want to change password, use [K / L] to
select “Yes”. Use [the Number buttons] to enter a
new password except for 4737, then press [OK].
<change the password>
Change Password?
Yes
No
Password Input
Yes
Your setting will be activated.
Note
•
Press [CLEAR] to erase numbers entered incorrectly.
•
When you forget the password or you want to clear all
settings in “Parental Lock” menu, enter 4737 using [the
Number buttons] in password input window. Password
will be cleared and parental levels will be set to “OFF”.
2
Audio Out
Choose the appropriate audio setting for your external
device.
It will only affect a disc playback.
Use [
K
/
L
] to select a desired item, then press
[OK]
.
Audio Out
Dynamic Range Control
PCM
Dolby Digital
A
B
C
A
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and
loud sounds.
Use [K / L] to select a setting, then press [OK].
Dynamic Range Control
ON
OFF
Your setting will be activated.
Note
•
Dynamic range control function is available only on the
discs which are recorded in the Dolby Digital format.
B
PCM (Default : 48kHz)
Use [K / L] to select a setting, then press [OK].
PCM
48kHz
96kHz
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible with
96kHz PCM, select “48kHz”. 96kHz sound will
be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Note
When playing back disc with copyright protection
•
Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
Playback (cont’d)
Instructions continue on the next page.
To Next Page
Loading...
