CD OPERATION
SEL
FM/MW/LW CD RECEIVER 45W x 4 CD-R&RW
34567
8
2
1
LOADING AND EJECTING THE CD………………1,8
Insert a disc into the CD slot 1 and the CD player will start.
The system remains in CD mode and “
” appears in the display.
Press the eject button 8 to eject a disc.
SWITCHING TO CD MODE.......................................2
Press the SOURCE button 2 with the power on to switch from radio mode or AUX mode to CD
mode.
When the CD mode is switched on while a disc is loaded, play resumes from the point at which
play was stopped.
When the entire disc has played, the unit returns to the first track and play resumes.
SKIPPING TRACKS .............................................…3
Press the TUN/TRK button to skip to the beginning of the next track.
Press the TUN/TRK
button to skip to the beginning of the previous track.
Press and hold the TUN/TRK
or TUN/TRK button 3 for several seconds to search
quickly (with sound) in the forward or reverse direction.
When the button is released, the CD resumes normal play.
Notes:
• You can play CD-Rs or CD-RWs (rewritable CDs) on this unit in proper condition.
• Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the
condition of the disc) may not play on this unit.
• You cannot play CD-R/CD-RW that is not finalized. (A finalize process necessary for a
recorded CD-R disc to be played on the audio CD player.)
PLACING THE CD IN PAUSE MODE ......................4
While playing a CD, press the PAU button 4.
To resume playing, press the PAU button 4 again.
10
To Next Page
Loading...
