-26-
CLOCK
DISPLAY MODE CHANGE.......................................... 1
The display on the unit can be changed by pressing CLK button c. Press the CLK button c to switch
between the clock and audio display. When a radio, CD function is performed while the time display is se-
lected, the audio display will appear for 5 seconds, then the display will return to the time mode.
ADJUSTING THE TIME .............................................. 1, 2, 3
To adjust the time, press the CLK button c for more than 2 seconds. The time display blinks.
To adjust the minute, press the button d.
To adjust the hour, press the button e.
To advance the time rapidly, hold the or button continuously.
Press CLK button c again to start the clock.
CLOCK RESET ......................................................... 1, 4
Press CLK button c for more than 2 seconds and the time display blinks. While blinking, press preset
button 6 f to skip to the nearest half-hour as follows:
Example: 3:00
– 3:29 3:00
3:30
– 3:59 4:00
4 1
23
• This unit uses a 12-hour clock.
• The clock function and radio presets are retained in memory when the audio is switched off.
Notes
To Next Page
Loading...