Sanyo GCD 2700 - Operation Check via LCD Display; Tracking Balance Adjustment (Service Mode)

.+
v
D PLAYER’S SERVICE MODE
TEST D[X
CHECKING
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
THE CD PLAYER’S OPERATIONS WITH THE
LCD’S
Set the CD player to disc table “ 1 “.
Press disc select key * 1 a.
Preparations for setting the unit to the” PLAY “ sta-
tus are now complete.
To check the operation mode, switch to the service
mode.
Turn the POWER switch to “ ON “.
Switch the unit to the service mode by pressing the
CD player’s “ STOP “ key within one second after
pressing the CD player’s “ MEMORY “ key and the
tuner’s “
BAND “ key simultaneously.
The numbers (O through 5) that appear in the LCD’s
“ DISC NO, “ indicate whether the CD player is oper-
ating correctly or not,
[f a malfunction exists, refer to the table below to
de-
termine the nature of the malfunction.
NUMBER DISPLAY
DISC NO.
1
l-- \
.—— .
—
—
awurw
1
WUH(I(XX
IN HIO llANIXIM WI” SIOE A
SEEP
~M~ ,,,,-/-/ /:/ /:/ /:/ VW’ ~ _/ /:/ /:/”/:/ /:/ fllsyfio
I L~v~L
I_I/_/ [_/ /_/ ,,WAM/ /_/ /’_/:/’_/ /_/ Mll, IIM I
IIMIW IICC IIIS(; S1 [11A(:I( A(I ((l MONfJ F~ Tlw11)1[
L
D
-J
mlz3456? 8g1011121a 1415 F%T~[LCONT
—
— —
I
LCD
DISC NO.
I
CD ERROR MESSAGE
1
I o I No malfunction I
1 The pickup’s laser was not focused properly during a focus search.
2 The sub-code could not be read when the disc began spinning.
3 The TOC (table of contents) could not be read.
t
4 I The focus was lost when the servo was on (e.g. ~during playing). . .. .
5 I The sub-code could not be read when the servo was on. (e.g., during playing).
“ TRACK NO. “in
the LCD indicated how far the CD
player’s operations have progressed.
LCD
TRACK NO.
CD OPERATION
-. ....
. .
00 FOCUS SEARCH START
,
01 i FOCUS SEARCH START I
02 The ufit iswaiting for the pickup’s laser to focus during a focus search.
03
Focusing of the pickup’s laser during a focus-search%as been completed.
04 The kick when the spindle motor begins rotating.
05 CLT (Constant liner velocity)
and Tracking “ ON-”
06 CLT and Tracking “ ON “
o- FOCUS SEARCH END
30 I Brakina of the sDindle motor is beraun. I
..-.
,.’
4
40
➤> (FWD, SKlp/SEARCH)
41
+< (REVERSE, SKip/SEARCH)
50 PLAY
51
PLAY
52
PLAY (music skip)
... ,’.
‘.. .
-17-