Sanyo GCD 2700 - FRONT PANEL ASSEMBLY REMOVAL

..
v
{EMOVAL AND INSTALLATION
. Disconnect the power cord plug from the electrical oudet.
● All wiring should be returned to the original posistion after work is completed.
. First have reading many tie new FIXERS (614 129 4971) for replacement.
I. REMOVAL OF FRONT PANEL ASSEMBLY
(1) Remove the 6 CD changer block mounting screws. ((0)
(2) Remove the 8 side panel mounting screws. (@)
(3) Remove the 11 rear
panel mounting screw. (@))
). REMOVAL OF FRONT PANEL BUTTONS
. . ..
‘.,,
., .,..
.’. ....
.. . .
-5-