Sanyo HV-DX1E - Base Assembly Sled; Gear Assembly Feed; Gear Assembly Middle; Gear Assembly Rack

5-3
DECK MECHANISM DISASSEMBLY
3.Base Assembly Sled (Fig. 5-3)
1) Release 4 Screw(S2).
2) Disconnect the FFC Connector(C1)
3-1. Gear Assembly Feed
1) Unhook the Locking Tab(L2) in direction of arrow.
3-2. Gear Middle
3-3. Gear Assembly Rack
1) Release the Scerw(S3)
4. Rubber Rear (Fig. 5-3)
GEAR MIDDLE
GEAR ASSEMBLY RACK
PICK UP
ASSEMBLY
GENERAL
GEAR ASSEMBLY FEED
GEAR MIDDLE
GAER ASSEMBLY RACK
MOTOR ASSEMBLY SPINDLE
RUBBER REAR
MOTOR ASSEMBLY
SPINDLE
PICK UP ASSEMBLY GENERAL
BASE PU(OUTSERT)
GEAR ASSEMBLY FEED
(L2)
(S2)
(S2)
(C1)
(S2)
(S2)
(BLACK)
(GREEN)
(S3)
(BLACK)
(GREEN)
Fig. 5-3