[ENGLISH]
GB-24
ERASE GUARD
Erase guard functions to prevent accidental erasure.
1. Press and hold the MENU/FOLDER button down at least 2 seconds in
the stop mode.
2. Press the MENU/FOLDER button repeatedly to select “ERASE
GUARD”.
3. Press the TIME/SET button. “OFF” blinks.
4. Press the + or – VOLUME button to select “ERASE GUARD ON”. “ ”
appears on the display.
5. Press the TIME/SET button to set it. “ ” remains lit.
Note:
If the ERASE button is pressed after setting Erase Guard, “GUARD” appears
briefly on the display.
ERASE
GUARD
OFF
To Next Page
Loading...
