[ENGLISH]
GB-2
PRECAUTIONS
•Never remove the SD Card while operating the unit. Otherwise, the SD
Card, recorded contents and the unit will be damaged.
• If the line of rectangles in the battery indicator ( ) disappear during
recording, stop the recording immediately and replace the batteries.
• Do not disconnect the AC adaptor or remove the batteries while operating
the unit.
• Before erasing, make sure that the battery indicator is full.
• The apparatus should not be exposed to dripping or splashing.
• Do not insert pins, etc., inside the unit.
• Do not drop the unit or subject it to strong shocks.
• Do not use where there are extremes of temperature (below 5°C or
exceeding 35°C).
• Set the write-protect switch to “Unlock” before inserting
to the unit.
• is registered trademark of SD Association.
• Other system and product names generally are the
registered trademarks or trademarks of the respective development
manufacturers. The symbols
TM
and
®
are not shown in this manual.
Notes on clock setting
Be sure to set the date and time of the unit’s clock before use. (See Page 8.)
Accessories
USB cable x 1
CD-ROM x 1
Case x 1
SD Card (Initialised) x 1
AAA/LR03/HP16 Battery x 2
To Next Page
Loading...
