Sanyo ICR-EH800D - Page 70

70
Completing timer setup
c
Press the VOL (+/–) button to select “OK”.
d
Press the /OK button.
• Timer is set up and the “COMMON MENU” screen
returns.
e
Press the MENU/PLAY LIST button.
• The basic screen returns. If the timer is turned on,
appears on the screen.
• When the calendar settings are initialized, timer recording is turned off.
• After you have set up the timer to play a file from the internal memory, if the selected
file is erased or the security setting is not turned off, when the designated time
arrives, the unit beeps for 30 seconds instead of playing the file.
• In the following cases, timer recording (or playback) may not function correctly.
- If the internal (or microSD card) does not have enough memory for recording as
specified by the timer
- If you have specified to use a file (for playback) or folder (for recording) on a
microSD card but no microSD card is inserted
- If the number of recorded files has exceeded the limit
- If the unit is connected to your PC but has not started even when the time
designated by the timer has arrived
- If the battery is low or the power is turned off during time recording (or playback)
• If for some reason the timer operation does not activate,
or as well as “CAN’T
START TIMER OPERATION” appear.
: If the timer repeat setting is set to “ONCE” and timer recording fails, the timer
then changes to “OFF”.
: If the timer repeat setting is set to “DAILY” or “SELECT” and timer recording fails,
the timer remains “ON”.

MODE:MP3192kbs
OK
【TIMER】
2/2
RECTO:MICA
MIC
ST
A
SD
MODE:MP3192kbs
OK
【TIMER】
2/2
RECTO:MICA
MIC
ST
A
SD
RECREMAINTIME
TIMERON
2/2
FLAT
MP3 128k
MIC
ST
A
SD
00
25
0
45
16
m
h
s
m s
A
RECREMAINTIME
TIMERON
2/2
FLAT
MP3 128k
MIC
ST
A
SD
00
25
0
45
16
m
h
s
m s
A