Sanyo ICR-FP600D - Preparation; Inserting a Battery

GB-11
Preparation
Insertingabattery
1
Whilegentlypressingtheportionofthebatterycompartmentlid
showninthefigure,slidethelidinthedirectionindicatedbythe
arrow.
Alwaysmakesurethebattery
isinsertedinconformitywith
the+/-polaritymarkings.
Note
2
InsertanAAA/LR03/HP16battery.
Firstinserttheminus side
andtheninserttheplus
side.
3
Closethebatterycompartmentlid.
Presshereandslide
thelid.
Besuretoturnthepoweroffwhenyoureplacethebattery.
Insertingorremovingthebatterywiththepoweronmaycausea
failureordamagetodata.
Note
Back
IllustrationsofICR-FP700Dareusedbelowforexplanation.
gap]vkjcb]cl,glbb// .6,//,0618018/3N
K
All manuals and user guides at all-guides.com