Sanyo ICR-FP600D - Setting the Voice Sensing Level (VAS Value); Recording from External Sources

GB-20
Recordingfromexternalsources
Thisunitcanrecordmusic,etcplayedonexternalequipmentsuchasCDorMD
players,radio-cassetterecorders,andcomponentstereos.
1
Turnthepoweron.(SeePage12)
2
Setthe[Microphone/Lineinput]switchtothe"LINE"position.
3
Useacommerciallyavailableaudiocabletoconnecttheexternal
inputsocketofthisunitwiththeaudiooutput(headphone)
socketoftheexternalsource.
Useanaudiocable(stereominiplug,
3.5
,withoutresistor).
Externalinputsocket
Audiooutput
(headphone)
socket
- WhenrecordingbeginswiththeVASfunctionon,recordingwill
occurfortwosecondsjustafterstarting,regardlessofwhether
soundisdetectedornot.
- Ifthevoicelevelislowerthanacertainlevelforapproximately
twoseconds,recordingpauses.
- SincelowvoicesmaynotberecordedduringtheuseoftheVAS
function,toensurerecordinginsuchsituations,turnofftheVAS
function.
Note
Settingthevoicesensinglevel(VASvalue)
Youcanadjustthevoicesensinglevelinfivesteps
(1-5)toaccomodatethesourcevolumelevel.
Alargervaluewillincreasethevoiceactivation
sensitivitysorecordingwillbetriggeredbylower-
levelaudio.Ifthevalueistoosmall,thisunitmaynot
detectvoice.Setthemicrophonesensitivity(seepage
18)inaccordancewiththesourceinputlevelsothat
theVASfunctioncanworkmoreeffectively.
Procedure:
Toadjustthevoicesensinglevel,pressthe[
]/[ ]buttonswhile
recordingwiththeVASfunctionturnedon.
VASvalue
gap]vkjcb]cl,glbb0. .6,//,0618018/7N
K
All manuals and user guides at all-guides.com
all-guides.com