GB-11 [ENGLISH]
VAS recording
VAS: Voice activated system
1. In the stop mode, press the n STOP/MENU button for at least 2 seconds.
Move the Jog switch up or down to select “VOICE”, then press the Jog
switch.
2. Move the Jog switch up or down to select
“VAS”.
3. Press the Jog switch. The selected VAS mode
appears.
4. Move the Jog switch up or down to select “ON”. Then press the Jog switch.
5. Press the n STOP/MENU button twice.
6. Press the m REC button.
Recording begins when you are speaking into
the microphone. When dictation stops,
recording stops.
Move the Jog switch up or down to set the microphone’s sensing level when
recording begins. The VAS sensing level appears (VAS:1: Low - VAS:5:
High).
Selecting the microphone sensitivity (See page 20)
Selecting the recording LED (See page 21)
To Next Page
Loading...
